Models of shot-cutting steel wire

Common models of shot-cutting steel wire include S110, S170, S230, S280, S330, etc. The main difference between these models is the diameter, which affects their cutting speed and application scenarios. For example, the diameter of S110 is 0.3mm, the cutting speed is fast, and it is suitable for cleaning and processing the surface of steel castings; the diameter of S170 is 0.5mm, the cutting speed is moderate, and it is suitable for medium-level surface cleaning and processing; the diameter of S230 is 0.6mm, the cutting speed is slow, and it is suitable for high-level surface cleaning and processing; the diameter of S280 is 0.8mm, which is suitable for processing special material surfaces and cleaning mixed abrasives; the diameter of S330 is 1.0mm, which is suitable for special surface treatment and cleaning mixed abrasives.

In addition, there are some other models such as CW1.0, CW1.2, CW1.5, CW2.0, CW2.5, CW3.0, etc., the diameters of these models are 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm respectively. Although the specific naming of these models may vary from manufacturer to manufacturer, the basic principle is similar, that is, the larger the diameter, the slower the cutting speed and the more suitable for rougher surface treatment.

Choosing the right cut shot wire model requires considering the material, surface condition and treatment requirements of the workpiece. Smaller diameter cut shots have faster cutting speeds but greater consumption; larger diameter cut shots have slower cutting speeds but are suitable for rougher surface treatment. Therefore, it is very important to choose the right model according to specific needs.